Question #1:
Harmonic problems begin with non linear loads.
TRUE or FALSE?
Question #2:
Harmonic Voltages at the service entrance are caused due to poor utility control of supply voltage (i.e. the problem is generated by the utility company).
TRUE or FALSE?
Question #3:
Harmonic currents cause transformers to overheat due to the harmonics' higher frequency magnetic flux being induced into the iron core of a transformer.
In other words, are the hysteresis core losses in a transformer greater, since the magnetic flux (produced by a harmonic current flowing through the transformer winding) is at a higher harmonic frequency.
TRUE or FALSE?
Phone:
(804) 360-9288
FAX:
(804) 360-7824
E-Mail: info@LehmanEngineering.com
Address:
Lehman Engineering Company
P. O. Box 29160
Richmond, Virginia 23242
All Rights Reserved | Lehman Engineering Company | 804-360-9288 | PO BOX 29160 Richmond VA 23242 | Website by RCC